Thold 1.6 give wrong alert with bandwith mesurement

[Rno]

Hello,
I just upgrade to the latest thold plug in 1.6 on my cacti 1.2.19 and Now I have some threshold triggered for bandwith messurement

80G po 4300 High / Low 199.46 M 50.00 / 75.00 - / - 5 Minutes N/A Never Yes 24m No
40G eth 4299 High / Low 276.82 M 50.00 / 75.00 - / - 5 Minutes N/A Never Yes 24m No
80G po 4298 High / Low 276.82 M 50.00 / 75.00 - / - 5 Minutes N/A Never Yes 24m No
80G po 4297 High / Low 6.11 M 50.00 / 75.00 - / - 5 Minutes N/A Never Yes 24m No
40G eth 4308 High / Low 226.78 50.00 / 75.00 - / - 5 Minutes N/A Never Yes 24m No
20G Po 4307 High / Low 229.50 50.00 / 75.00 - / - 5 Minutes N/A Never Yes 24m No
40G po 4304 High / Low 198.63 M 50.00 / 75.00 - / - 5 Minutes N/A Never Yes 24m No
40G po 4303 High / Low 617.41 T 50.00 / 75.00 - / - 5 Minutes N/A Never Yes 24m No
40G po 4314 High / Low 284.08 50.00 / 75.00 - / - 5 Minutes N/A Never Yes 24m No
The interface are way under used. So what change ?

[Rno]

So no expertise on that subject ?
Nobody is using thold to mesure the percentage of usage of a line that can give me some advice ?

OK,
So try the following RPN solution:
CURRENT_DATA_SOURCE,8,*,1048576,/,|query_ifHighSpeed|,/,100,*

The first part is CURRENT_DATA_SOURCE,8,*,1048576,/
because I saw that DATA_SOURCE is bit, and way to bigger for the calculation, so I dive to 1048576 so I have highSpeed same range.

then the last part is normal one.
but still the value is given in K (1000) and their no reason for that.
example I have 40K for a 1.35G usage of a 10Gig link

See the attached file with same mesure, on 2 different page, same server, same link selected

Thold.pdf

(256.4 KiB) Downloaded 74 times